Links
- Visit Springfield-Armory.com to learn more about the Ronin 1911 in 10mm.
- Shop GunsAmerica for a Ronin 1911.
- Featured Ammo: Federal, PMC, Blazer.
It is hard to believe that this far along in the history of the 10mm, I still had not shot one. So for me, while the 10mm Ronin was at the end of the day just another 1911 review, it really wasn’t. I had been intimidated by the 10mm.
The caliber is the real story on this gun. If you are a fan of the 1911 platform, and you plan to buy some version of what has become a timeless pistol, it is a no brainer to buy the original caliber, a .45ACP. Some people elect to go down in size, to a 9mm, and we have even reviewed a .357 Magnum 1911 here at GunsAmerica Digest.
But what about the 10mm? Ballistically it falls just north of the .357 Magnum, pushing a 185-200gr bullet out to 1,200 feet per second. Intimidated? I was too, because frankly I have lost my tolerance of really sharp recoil, but I happened to be the only writer here with any 10mm ammo on hand, so there you go.
To my surprise, the recoil is not uncomfortable at all in this platform. Federal makes a couple genuine full snot 1,200 FPS options in carry ammo, and shooting over 100 rounds over the course of an afternoon, not once did I pull a shot because of anticipated sharp recoil. The gun is pleasant to shoot.
I had not realized it before, but the 1911 platform manages recoil really well. If you have ever shot a pistol caliber carbine in .45ACP, its a stout load. Yet the 1911 in .45ACP is not unpleasant at all to shoot. Turns out that the same ergonomics of the gun upward scale to the 10mm really well.
My goto SHTF gun has been for a long time a doublestack .45ACP 1911 (Para). I carry a .45ACP XD-S every day. I’m a .45ACP guy! But since this review, I have come to question it, at least in terms of a full-frame fighting pistol. The 10mm in a well designed full-framed steel pistol is not unpleasant at all…with north of .357 Magnum ballistics.
If you are new to shooting, and have already decided that you want a 10mm, right now that caliber is essentially the biggest (practical and affordable) boy on the block. I think you will be able to get one. Demand for guns is starting to saturate, and I’m even seeing more ammo available.
Is the 1911 the right platform for you in a 10mm? That is tough to answer. You kind of have to shoot the gun. But my feeling on the 1911 is that it works for almost everyone. There is a reason that the gun has endured for over a century. There is a reason why many of the newer guns will sport a “1911 grip angle.” And there is a reason why the 1911 by far the most popular pistol for high end aftermarket parts. You will be hard pressed to find something that you don’t like about it.
The nice thing about buying a Springfield, not to go wild fanboy too much (even though I am one), is that you won’t have to buy any of those aftermarket parts. It comes with a hammer forged match barrel, skeletonized trigger and hammer, fiber optic front sight, and extended magazine. The grips are gorgeous on the Ronins, and the two tone puts it steadfastly on the sexy side of handguns. Springfield even did away with the otherwise useless bulky plastic case for this Ronin series, and gave you a nice zippered range bag instead.
At an MSRP of $849. That’s crazy.
Right now, if you are reading this when it first went out, I strongly doubt you will find one for that price, but I think things are looking up in that regard. Springfield is making guns as fast as they can I’m sure, but I was in a Bass Pro the other day and though they had some Range Officers, they had yet to get a Ronin in stock. On GunsAmerica a few have appeared, but everyone is asking more than $849. Hopefully we will be back to normal soon.
The performance of the Ronin (I should say my new Ronin lol, because I bought it), was, as expected, flawless. I expect flawless from every gun I shoot these days. There is just no room anymore for break in periods or sending the gun to the gunsmith to tune up. Out of the box a gun should run, never malfunction, and it should shoot close to point of aim. The 10mm Ronin did all off those things.
What sets the Ronin apart from other 1911s in its pricepoint is that both the frame and slide are forged, not cast. Many of the 1911s around the $700 to $750 street price range have a forged slide, with a cast frame. All of the import guns I know of use a cast frame.
That isn’t to say that those guns don’t run. I have an import 1911 that flips brass into your face, but it runs. The frame is cast on it, and not at all clean and elegant, but hey it works kinda. I would call that kind of thing the poster child for why, if you can snag a Ronin, I wouldn’t even say there is a counter-argument.
Cheap guns are cheap guns, except when Springfield makes them. Then they are just a better value guns than more expensive guns with the same or inferior performance. Oh there I go with the fanboy again.
My accuracy testing with the 10mm Ronin was about what I am able to shoot with a 1911. At 10 yards my closest 8 shot groups were just over 1.5 inches, and they expanded to about 3 inches.
Surprisingly, the full snot loads outperformed the lighter range ammo. Most gunwriters shoot 3 round groups, but I prefer to show people what they can expect when they take the gun to the range, and most of us shoot full mags. Over the course of the afternoon, I did get several times a first three rounds into a ragged hole the size of a quarter.
In my video I show you the trigger pull and a basic field strip for most full frame 1911s. The only snag I hit with the gun was dropping the slide with one thumb. But one of my Youtube commenters gave me a tip I had never heard before. He said try it with either no mag or a full mag, because with an empty mag it is harder. Go figure he was right. And the slide drops no problem with a full mag and only one thumb. So I have a thumb in reserve after all.
If you carry one in the chamber, the 10mm Springfield Ronin gives you 9 rounds at the top of the food chain in handgun calibers. Extra 10mm mags are available on Springfield’s website (I bought four), and ammo is out there right now, albeit expensive. If you can get your hands on a Ronin for at least close to intended retail price, snag it. I don’t think you will find it unpleasant to shoot, and my oh my what a gorgeous little monster.
Links
- Visit Springfield-Armory.com to learn more about the Ronin 1911 in 10mm.
- Shop GunsAmerica for a Ronin 1911.
- Featured Ammo: Federal, PMC, Blazer.
***Buy and Sell on GunsAmerica! All Local Sales are FREE!***